● The graphene full heat exchange technology is more energy-saving, and the exhaust gas and fresh air are cross-replaced.
● Purification and sterilization: each product has its own initial effect, medium effect and HEPA in addition to PM2.5 and aerosol filtration, reducing the content and probability of outdoor viruses and aerosols entering the room, and then we have always equipped with ultraviolet sterilization at the air outlet at the end of the product. And negative ion purification, and we use ozone-free ultraviolet germicidal lamps to avoid secondary damage to the human body, primary filter G4 + medium efficiency F7 + HEPA high efficiency H13 (aerosol filtration) + return air F7, can remove particulate matter and bacteria in the air , dust and other harmful substances, to ensure that the indoor air is fresh and clean.
● DC inverter compressor.
● Use a high temperature cold source 16℃ for the front table cooling.
● The inside of the equipment is equipped with casing heat exchanger and front surface cooling, which can be connected in parallel or in series.
● DC fan, external static pressure >150PA.
● The bathroom exhaust air is introduced into the unit and the fresh air for heat recovery, and an external humidification module can be combined with PTC humidification.
● Supply air temperature can be adjusted from 16-22°C.
● Double electronic expansion valves are precisely regulated, and the condensation heat is reheated to increase temperature.
● Under the condition of fresh air mode, the dew point of supply air is below 10℃, and the moisture content is 6-8g.
● It can dehumidify separately in transition season, and it can also work independently after disconnecting the heat pump host.
● You can upgrade and download programs in the cloud and open the 485 communication protocol.
● The exhaust fan automatically adjusts the air supply pressure according to the length of the pipe.
